Digital PS-2000B Series Guia de Instalação descarregar pdf (Página 6)

-6-

CF Card Handling

CAUTIONS

CF Card Handling

• The following CF Cards are manufactured by the Digital Electronics

Corporation and are recommended for use with this unit; GP077-CF20,

and GP077-CF30. The performance of this CF Card Unit cannot be

guaranteed when using another manufacturer’s CF Card.

• Be sure to use a CF Card with a rated voltage of DC 5V.

• Be sure to follow the instructions given below to prevent the CF

Card’s internal data from being destroyed or a CF Card malfunction

from occurring:

• DO NOT bend the CF Card.

• DO NOT drop or strike the CF Card against another object.

• Keep the CF Card dry.

• DO NOT touch the CF Card's connector holes or the CF card unit's

connector pins.

• DO NOT disassemble or modify the CF Card.

When using the CF Card Unit and the CF Card

• Prior to inserting the CF Card, be sure to confirm that the rear and the

front of the CF Card are correctly oriented, and that the CF Card con-

nector position is correct. If the CF Card is inserted incorrectly, the

CF Card, its internal data, and the CF card unit may be damaged.

• Prior to inserting or removing the CF Card, be sure to turn OFF the

PS-B to prevent damaging file data and stopping OS. When operating,

PSB-CFU01 regards the CF Card as the hard disk.

• Never turn OFF or reset the PS-B while accessing the CF Card to pre-

vent damaging file data. Also, be sure to shut down the PS-B unit's

OS before turning OFF the main power.



 Data Overwrite Limit

The CF Card has a data overwrite limit of approximately 100,000 times. Therefore,

be sure to back up all CF Card data regularly to another storage media.

(100,000 times assumes the overwriting of 500KB of data in DOS format)



 CF Card Insertion and Removal

• Familiarize yourself with the differences between the top and bottom surfaces of

the CF Card. Also, be sure to read the CF Card's operation manual to ensure that

the CF Card is properly oriented when it is inserted (i.e. whether the top of the card

is up or down etc.)

• When connecting the PSB-CFU01 cable with the IDE I/F 1, insert/remove the CF

card from the PSB-CFU01 outside the PS-B, not inside the PS-B.

1 2 3 4 5 6 7 8

Sem comentários

Digital PS-2000B Series Guia de Instalação Página 6