Digital PS-2000B Series Guia de Instalação Página 7

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 8
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 6
-7-
Inserting the CF Card
1) Turn OFF the PS-B unit's main power, and uncover the PS-B's cover/mainte-
nance cover. For the procedures of the uncover,
3. Installation.
2) Loosen the CF card stopper attachment screw, and unlock the CF card stopper as
the following arrow shows. (see diagram)
3) Hold the CF Card by the end opposite the connector and insert it into the CF
Card slot until the eject button is pushed forward. If the card seems to jam or
does not move smoothly, remove the CF Card. Confirm that the card is properly
oriented.
4) Pivot (Push) the eject button 90
o
to the right.
5) Reset the CF card stopper, and fasten the CF card stopper attachment screw. The
torque should be 0.5 to 0.6 N•m.
6) Replace the PS-B unit's cover and reattach all four (4) attachment screws. If you
used only the maintenance cover, replace that cover and fasten the its two (2)
attachment screws.
Removing the CF Card
1) Turn OFF the PS-B unit's main power, and uncover the PS-B's cover/mainte-
nance cover. For the procedures of the uncover,
3. Installation.
2) Loosen the CF card stopper attachment screw, and unlock the CF card stopper as
the following arrow shows. (see diagram)
3) Pivot the eject button outwards and push it in. Grasp the edges of the CF Card
with your fingers, and slowly pull it out.
4) Pivot (Push) back the eject button 90
o
to the right.
5) Reset the CF card stopper, and fasten the CF card stopper attachment screw. The
torque should be 0.5 to 0.6 N•m.
6) Replace the PS-B unit's cover and reattach all four (4) attachment screws. If you
used only the maintenance cover, replace that cover and fasten the its two (2)
attachment screws.
PSB-CFU01
CF Card Stopper Attachment Screw
Eject Button
CF Card Stopper
PSB-CFU01
CF Card Stopper Attachment Screw
Eject Button
CF Card Stopper
Vista de página 6
1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários